Alongside today's news that Apple has finally released the iPhone/iPod Touch OS 3.0 to the public (download it by opening iTunes, connecting your iPhone or iPod Touch and clicking the 'Check for Update' button), some websites are noting that it is easy to enable tethering on your iPhone, even if AT&T hasn't officially announced support for this feature.

Tethering is great for small Internet browsing sessions, or when your iPhone just isn't enough to do what you need to do (for instance, adding content to a website, or uploading a large file). But don't Tether too much: First, if a lot of people are tethering, it can slow down the network for everyone else, and second, your iPhone's battery takes a huge hit (even if charging) while you're using it's 3G signal for tethering.

[NOTE: Visual Voicemail may stop working after you follow the steps below. To get it back, simply go to the Settings app, tap on General, then Network, then Cellular Data Network; tap on the "Visual Voicemail" APN and change it from wap.cingular to acds.voicemail.]

Something you don't think about every day, but something that could save you enough change to get a Big Gulp every now and then: You can take a few simple steps to drastically reduce the amount of power consumed by your computer. Especially when you're doing many things at the same time with multiple hard drives and the screen turned on at full brightness!

This article is written specifically for the 24" iMac (late 2008), but applies to pretty much any Mac that uses electricity (read: ALL of them). By following the steps in this article, you can save a bit of power, which translates into saving a small amount of change each month. And who wouldn't like a few extra nickels in this economy?

The Discovery

I recently purchased the APC Back-UPS NS 1250, and one of the most amazing features of the UPS is the ability to see how many watts are being actively consumed by a device plugged into it.

I found the results of my testing to be quite interesting. When I had the iMac running with the screen at full brightness, the computer was using the energy equivalence of an old 100 Watt tungsten (i.e. 'energy sucker') light bulb! I don't typically run the screen this bright, though, because the lighting in my computer room is typically subdued. So I turned the brightness down all the way (a comfortable level for my vision), and looked again. This time, the computer was using about 75 Watts. NICE!

(Big bright chart for visual learners).

A blast from the past! The following article is from one of my first websites, ca. 1999, and was updated a couple times throughout it's history. I am re-posting it here because my old website will be deprecated quite soon.

A few notes before we begin: Since the writing of this article, Time Machine came into being (along with Mac OS X 10.5), and has brought about a revolution in the way I maintain backups: my schema now is to have a local daily Time Machine backup, then do a once-a-month DVD backup (stored offsite) of my most important files. For most home/small business users, this should be adequate.

Another revolution in data backup is the idea of backing up 'to the cloud' - with the prevalence of broadband Internet access, and the plethora of options for online storage, many companies offer solutions to online backup that were only dreamt of back in the late nineties. Some solutions I recommend: MobileMe (what I use, but not for everyone), Mozy, BackJack, and JungleDisk. (No, those aren't referral links—would I try pulling that on you?).

Backup Strategies for OS X

A question often asked on the Apple Discussion boards and by my fellow Mac users is: "How/when should I backup my Mac, and what is the best/quickest and most reliable way to do it." This is a complicated question, as there are many different ways one can go about backing up OSX.

There are three basic ways that I would like to cover in this article:

1. Using Disk Utility to quickly and easily make a complete, bootable backup to an external drive;
2. Using Carbon Copy Cloner to either (a) do the same thing as Disk Utility, or (b) to clone a certain folder or group of folders (another program that does a great job is SuperDuper!);
3. Drag-and-drop copy files and folders for a quick backup of important files.

Here's a quickie: A lot of Mac users are on Windows networks, and need to sometimes connect to a shared folder on their network to share/retrieve documents with other Windows users. The easiest way to do this is to type in the path to the shared folder in the "Connect to Server..." dialog box. To do this, just:

1. Switch to the Finder.
2. Choose the "Connect to Server..." menu option in the Go menu (or press Command-K).
3. Type in the path to your windows shared folder as follows:

smb://SERVER_NAME/share-name/folder-name

Hopefully, a dialog box will open up asking you to type in your username and password. If you need to find out the path of your windows shared folder, ask your network administrator. (note: private shared folders usually have a dollar sign after them—for example, smb://SERVER_NAME/share-name/folder-name$).

Mac OS X's Mail program has a very handy feature called 'Previous Recipients' that does a very nice thing: It saves a list of every person and email address you've ever sent an email to. Then, it automatically fills in that person's email address when you type it or the person's name in the 'To' field in a new message. This is usually a good thing, because it saves you time (you don't have to look up the address again!).

However, there are times when you want to send an email to a specific email address for that person, and the email address that Mail automatically inserts is—gasp!—the wrong address. For example, I want to send an email to my friend John, so I type in "John" in the To field. Mail fills in the address I usually send emails to: john@example.com. But I want to send the mail to John's alternate address, johntheman@example.com... and I want to start sending emails to that address rather than to his first email address all the time. There are two easy solutions to this problem:

Having a screenshot of something you see on your Mac can sometimes be priceless, especially if something happens that you want to show someone else, or if you want to email someone a picture of how to do something on their Macs. Fortunately, Mac OS X has a ton of options for taking pictures of the screen, or even individual elements of the screen. We'll get into the basics, and we'll also show you some advanced techniques that many 'power-users' may not know of (yet).

Quite often, I am asked one of two related questions: 1) "Why can't I delete this pesky file? My Mac says the file is locked, and I can't delete it unless I do something special!" or 2) "Gaa! I can't copy <insert name here> to my flash drive or another hard drive because it's locked—help!"

Well, I will answer those questions, and much more, after the break.